GL Series Switch Disconnectors

Lovato Electric

GL Series Switch Disconnectors

3 pole and 4 Pole Switch Disconnectors 160A to 630A

  • Compact dimensions
  • With direct operating handles or door coupling
  • DIN rail mounting up to 315A
  • Four pole version achieved with addition of fourth pole add-on
  • Wide range of accessories
COMPACT SIZE
The three-pole switch disconnectors are made up of a body with compact
dimensions: 162mm wide up to 315A, 203mm from 320A to 500A and
231mm for 630A.
FOUR-POLE VERSION AVAILABLE
Switch disconnectors are supplied with three-pole configuration.
To obtain the four-pole version, a fourth-pole add-on can be
purchased.
COMPONENT FLEXIBILITY
It is possible to mount the fourth pole, neutral and earth/ground
terminals on both sides of the switch disconnectors using 2 screws
FLEXIBLE INSTALLATION ORIENTATION
Switch disconnectors can be installed in
all directions. The clips for screw fixing
can be adjusted both in rotation and
position (flexible fixing interaxis).
ANTI-SLIDE INSERT FOR DIN RAIL
For sizes from 160A to 315A there are two
rubber pad inserts prevent the sliding of
switch disconnectors on the DIN rail.
Specifications
– 160A to 630A (Ac21A <= 690V, AC23A <=415V)
– rated insulation voltage Ui – 1000V
– rated impulse withstand Uimp – 12kV
– Mechanical life 20,000 cycles 160A to 315A, 10,000 cycles 320A to 630A
Рscrew or 35mm DIN rail mounting up to 315A, screw fixing only   from 320A to 630A
– visible contacts
– 3 pole or 4 pole with add-on power pole
– add on auxiliary contacts
– add on auxiliary contacts
– lockable handles with IP66 and IP69K protection
– meets IEC/EN 60947-3, IEC/EN 60947-1

(please see linked PDF’s for further information)