DLS-27 Capacitance Level Switch

Dinel logo - Capacitance Level Switch

Dinel DLS-27 Capacitance Level Switch

Dinel DLS-27 Capacitance Level Switch for Industrial Process Control Applications

The Dinel DLS-27 Capacitance Level Switch range uses the dielectric constant of the material being controlled to calculate the level. Capacitance level switches are versatile, capable of detecting either liquids or solids and are highly accurate, even in turbulent conditions.

• See link for range of compatible supply and relay modules.

 

General Characteristics:

– Suitable for level detection of liquids and solids.
– Choice of electrodes for conductive and non-conductive media.
– Rope electrodes with length up to 6m.
– Suitable for most liquids and solids, including: oil, diesel, petrol, cement and sand, etc.
– Power supply/relay output units available.
– Hazardous area versions available.
– Switch rating: NPN N/O or N/C transistor output max 200mA (PNP optional).
– Operating voltage: 10-36VDC.
– Current consumption: 7mA.
– Sensitivity adjustment: Trim pot.
– Hysteresis: Adjustable by trimmer.
– Cable entry: DIN connector (optional 2m cable).
– Max working pressure: 3Mpa.
– Working temp: -20 to +85℃ (up to 200℃ with high temperature option).
– Construction: Stainless steel housing and electrode, PTFE coating on coated electrodes.
– Protection degree: IP67.
– Weight: 0.4kg (excluding electrode).
– Process connection: G 3/4″ (optional M30 x 1.5mm).

 

(PNP output available – substitute P in code for N)
(For high temp versions code becomes DINDLS27NT…)
(**** = electrode length)
Order CodeDescriptionOutput Type
DINDLS27N10CNOGE**** Uncoated for non-conducting liquids (50mm) and non-adhesive solids (100mm) electrode.NPN N/O
DINDLS27N10CNCGE****NPN N/C
DINDLS27N11CNOGE0030 Fully coated electrode for conducting liquids (water) 30mm electrode.NPN N/O
DINDLS27N11CNCGE0030NPN N/C
DINDLS27N20CNOGE**** Semi-coated for adhesive non-conducting liquids  and light solids  electrode 100-1000mm (in 10mm increments), horizontal (max 300mm), slant or vertical mounting.NPN N/O
DINDLS27N20CNCGE**** NPN N/C
DINDLS27N21CNOGE**** Fully coated electrode for conducting liquids and solutions (mud), 100-1000mm (in 10mm increments), horizontal (max 300mm), or vertical mounting.NPN N/O
DINDLS27N21CNCGE****NPN N/C
DINDLS27N30CNOGE**** Dismountable uncoated electrode for conducting and non-conducting liquids and powders, 100-3000mm (in 10mm increments), vertical mounting.NPN N/O
DINDLS27N30CNCGE****NPN N/C
DINDLS27N31CNOGE**** Fully coated electrode for aggressive conducting liquids, 100-2000 (in 10mm increments), vertical mounting.NPN N/O
DINDLS27N31CNCGE****NPN N/C
DINDLS27N40CNOGE**** Uncoated rope electrode (up to 6m) with weight for conducting and non-conducting liquids, grains and powders, not suitable for turbulence or flowing applications.NPN N/O
DINDLS27N40CNCGE****NPN N/C

(Please see attached PDF’s for further information)