E2S STExCP8 Explosion Proof Manual Call Points

E2S STExCP8 Explosion Proof Manual Call Points

 

E2S STExCP8 Explosion Proof Manual Call Points for Hazardous Area Signalling Applications

The STExCP8 Series of Explosion Proof Manual Call Points, featuring 316L stainless steel enclosures, is designed for the harshest of environments. Approved for Zone 1 and 2 hazardous areas for fire and gas alarm systems plus emergency shutdown and process control applications. Available with standard DIN rail terminals or the innovative E2S termination board providing dedicated connections for field installed EOL and/or series devices.

 

  • Operational Characteristics: 
– Break glass or push button manual call points.
– Ex d IIC zone 1 & 2 (IECEx).
– Alternative housing colours.
– Single or double pole switch.
– Optional stainless steel lift flap.
– Optional duty label.
– Optional series and EOL resistors, and diodes.
– Input Voltage/Current: 250VAC max, 5.0A max (no EOL/series resistors permitted); 48VDC max, 1.0A max (min 2.2kohm resistor);  24VDC max, 3.0A max (min 470ohm resistor).
– Terminals: DIN rail 8 x 2.5mm squared or termination board with 6 x 2.5mm squared, plus 4 x dedicated EOL & series terminals.
– Protection Rating: IP66.
– Temp Rating (degrees Celsius): -50 to +70.
– Cable Entry: 3 x M20 x 1.5 (2 on top, 1 on side).
– Construction: 316L stainless steel.
– Approval: Ex db IIC T6 Gb (max ambient temperature +70 degrees Celsius) single switch, Ex db IIC T5 Gb (max ambient temperature +70 degrees Celsius) double switch, Ex db IIC T6 Gb (max ambient temperature +60 degrees Celsius) double switch.
– Certificate: IECEx ULD 15.0018X.
– Weight: 1.20kg.
– Available Housing Colours: Red, Yellow, Blue, Green, Black, Red/White, Yellow/Black.

 

Order Code  Description
ESSR05510#****  STExCP8-BG break glass, no flap, no duty label, no resistors, single switch, (specify colour).
ESSR05520#****  STExCP8-BG break glass, no flap, no duty label, no resistors, double switch, (specify colour).
ESSR05511#****  STExCP8-PB push button, latching, no flap, no duty label, no resistors, single switch, (specify colour).
ESSR05521#****  STExCP8-PB push button, latching, no flap, no duty label, no resistors, double switch, (specify colour).
ESSR05514#****  STExCP8-PT push button, tool reset, with flap, no duty label, no resistors, single switch, (specify colour).
ESSR05524#****  STExCP8-PT push button, tool reset, with flap, no duty label, no resistors, double switch, (specify colour).
ESSR05517#****  STExCP8-M push button, non-latching with flap, no duty label, no resistors, single switch, (specify colour).
ESSR05527#****  STExCP8-M push button, non-latching with flap, no duty label, no resistors, double switch, (specify colour).

*Add F for flap option, *Add D for duty label option, *Add E for end of line resistor (with resistor value), *Add ED1 for end of line diode, *Add EZ for end of line Zener diode, *Add S for series resistor (with resistor value), *Add SD1 for series diode, *Add SZ for series Zener diode.

 

(please see attached PDF’s for further information)